User Manual

華碩 P9A-I 系列主板用戶手冊
4-39
Pass Gate Test [Disabled]
開啟或關閉 Pass Gate 測試。設置值有：[Enabled] [Disabled]
Pass Gate Refresh [Disabled]
設為 [Enabled] 在 pass gate 測試時開啟刷新期，且測試將為非確定的。設置
值有：[Enabled] [Disabled]
Pass Gate Test Direction [Lowest->Highest]
將 Pass Gate 測試設置為從最低至最高內存條，或從最高到最低內存條。設
置值有：[Auto] [Lowest->Highest] [Highest->Lowest]
Pass Gate Test Repetition [900]
設置同一行內 Pass Gate 測試重複率。
Pass Gate Test Iterations [1]
設置同一行內 Pass Gate 測試循環。
Pass Gate Swizzle [Auto]
為三星內存條開啟 Pass Gate Swizzle 模式。設置值有：[Enabled] [Auto]
Pass Gate Pattern [0's]
設置 Pass Gate 式樣。設置值有：[0's] [1's]
Pass Gate Target Pattern [1's]
設置目標 Pass Gate 式樣。設置值有：[0's] [1's]
Pass Gate Speed [1x Only]
設置 Pass Gate 速度。設置值有：[Auto] [1x Only]
Channel 0:
Rank 0 [Enabled]
允許測試 Rank 0。設置值有：[Enabled] [Disabled]
Rank 1 [Enabled]
允許測試 Rank 1。設置值有：[Enabled] [Disabled]
Rank 2 [Enabled]
允許測試 Rank 2。設置值有：[Enabled] [Disabled]
Rank 3 [Enabled]
允許測試 Rank 3。設置值有：[Enabled] [Disabled]
Channel 1:
Rank 0 [Enabled]
允許測試 Rank 0。設置值有：[Enabled] [Disabled]
Rank 1 [Enabled]
允許測試 Rank 1。設置值有：[Enabled] [Disabled]
Rank 2 [Enabled]
允許測試 Rank 2。設置值有：[Enabled] [Disabled]
Rank 3 [Enabled]
允許測試 Rank 3。設置值有：[Enabled] [Disabled]