Specifications
Table Of Contents
- Safety information
- Chapter 1
- Product introduction
- Chapter 2
- BIOS information
- 2.1 Managing and updating your BIOS
- 2.2 BIOS setup program
- 2.3 Main menu
- 2.4 Ai Tweaker menu
- 2.4.1 CPU bus speed : DRAM speed ratio mode [Auto]
- 2.4.2 Memory Frequency [Auto]
- 2.4.3 EPU Power Saving Mode [Disabled]
- 2.4.4 GPU Boost [OK]
- 2.4.5 DRAM Timing Control
- 2.4.6 CPU Power Management
- 2.4.7 Offset Mode Sign [+]
- 2.4.8 DRAM Voltage [Auto]
- 2.4.9 VCCIO Voltage [Auto]
- 2.4.10 VCCSA Voltage [Auto]
- 2.4.11 CPU PLL Voltage [Auto]
- 2.4.12 PCH Voltage [Auto]
- 2.4.13 Load-Line Calibration [Auto]
- 2.5 Advanced menu
- 2.6 Monitor menu
- 2.7 Boot menu
- 2.7.1 Bootup NumLock State [On]
- 2.7.2 Full Screen Logo [Enabled]
- 2.7.3 Wait for ‘F1’ If Error [Enabled]
- 2.7.4 Option ROM Messages [Force BIOS]
- 2.7.5 Setup Mode [EZ Mode]
- 2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy]
- 2.7.7 PCI ROM Priority [Legacy ROM]
- 2.7.8 Boot Option Priorities
- 2.7.9 Boot Override
- 2.8 Tools menu
- 2.9 Exit menu
- Appendices

v
Contents
2.5.5 System Agent Conguration ......................................... 2-18
2.5.6 ME Subsystem ..............................................................
2-18
2.5.7 AMT Conguration ........................................................
2-19
2.5.8 USB Conguration ........................................................
2-19
2.5.9 Onboard Devices Conguration ....................................
2-20
2.5.10 APM ..............................................................................
2-21
2.6 Monitor menu .............................................................................
2-22
2.5.11 Network Stack ...............................................................
2-22
2.6.1 CPU Temperature / MB Temperature
[xxxºC/xxxºF] ...... 2-23
2.6.2 CPU / Chassis Fan Speed [xxxx RPM] or [Ignore] / [N/A] 2-2
3
2.6.3 CPU Q-Fan Control [Enabled] ......................................
2-23
2.6.4 Chassis Q-Fan Control [Enabled] .................................
2-24
2.6.5 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage ..
2-24
2.6.6 Anti Surge Support [Enabled] .......................................
2-24
2.7 Boot menu ..................................................................................
2-25
2.7.1 Bootup NumLock State [On] .........................................
2-25
2.7.2 Full Screen Logo [Enabled] ...........................................
2-25
2.7.3 Wait for ‘F1’ If Error [Enabled] .......................................
2-25
2.7.4 Option ROM Messages [Force BIOS] ...........................
2-26
2.7.5 Setup Mode [EZ Mode] .................................................
2-26
2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy] ....
2-26
2.7.7 PCI ROM Priority [Legacy ROM] ..................................
2-26
2.7.8 Boot Option Priorities ....................................................
2-26
2.7.9 Boot Override ................................................................
2-26
2.8 Tools menu .................................................................................
2-27
2.8.1 ASUS EZ Flash 2 Utility ................................................
2-27
2.8.2 ASUS O.C. Prole .........................................................
2-27
2.8.3 ASUS SPD Information .................................................
2-27
2.9 Exit menu ....................................................................................
2-28
Appendices
Notices .......................................................................................................A-1










