User’s Manual
Table Of Contents
- P7F-C 规格概要
- 关于这本用户手册
- 安全性须知
- 第一章:产品介绍
- 第二章:硬件设备信息
- 第三章:开启电源
- 第四章:BIOS 程序设置
- 4.1 管理、更新您的 BIOS 程序
- 4.2 BIOS 程序设置
- 4.3 主菜单(Main)
- 4.4 高级菜单(Advanced)
- 4.4.1 处理器设置(CPU Configuration)
- 4.4.2 芯片组设置(Chipset)
- 4.4.3 内置设备设置(Onboard Devices Configuration)
- 4.4.4 USB 设备设置(USB Configuration)
- 4.4.5 PCI 即插即用设备设置(PCI PnP Settings)
- 4.4.6 ACPI 设置(ACPI Configuration)
- 4.4.7 Event Log 设置(Event Log Configuration)
- 4.4.8 Intel VT-d Configuration [Disabled]
- 4.4.9 SR-IOV Supprted [Disabled]
- 4.5 服务器菜单(Server)
- 4.6 电源菜单(Power)
- 4.7 启动菜单(Boot)
- 4.8 工具菜单(Tools)
- 4.9 退出 BIOS 程序(Exit)
- 第五章:RAID 磁盘阵列设置
- 第六章:安装驱动程序
- 附录:相关信息
5-18
第五章:RAID 磁盤陣列設置
8. 重複步驟 5 至 6 以添加第二塊硬盤到卷。
9. 完成後,按下 <C> 創建陣列,然後選擇【Save changes then exit
this menu】。
10. 工具程序開始創建陣列。
7. 確認信息出現。
按下 <M> 保留第一塊硬盤上的已有數據。若您選擇此項,第一塊硬
盤數據將被鏡像到您稍後會添加到卷中的第二塊硬盤。請確認您想要鏡
像的數據位於第一塊硬盤內。
按下 <D>
覆蓋所有數據並創建新的 IM 陣列。
Create and save new array?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
Exit the Conguration Utility and Reboot
LSI Logic Cong Utility v6.16.00.00 (2007.05.07)
Processing...may take up 1 minute
Creating RAID array
E s c = E x i t M e n u F 1 / S h i f t + 1 = H e l p
Space/+/- = Select disk for array or hot spare C = Create array
LSI Logic Cong Utility v6.16.00.00 (2007.05.07)
Create New Array Type -- SAS1068E
M - Keep existing data, migrate to an IM array.
Synchronization of disk will occur.
D - Overwrite existing data, create a new IM array.
ALL DATA on ALL disk in the array will be DELETED!!
No Synchronization performed.