Specifications

ASUS P5RD1-V DeluxeASUS P5RD1-V Deluxe
ASUS P5RD1-V DeluxeASUS P5RD1-V Deluxe
ASUS P5RD1-V Deluxe
4-274-27
4-274-27
4-27
DRAM IT/2T Command [2T]DRAM IT/2T Command [2T]
DRAM IT/2T Command [2T]DRAM IT/2T Command [2T]
DRAM IT/2T Command [2T]
Sets the DRAM timing. Configuration options: [1T] [2T]
Configure DRAM Timing by SPD [Enabled]Configure DRAM Timing by SPD [Enabled]
Configure DRAM Timing by SPD [Enabled]Configure DRAM Timing by SPD [Enabled]
Configure DRAM Timing by SPD [Enabled]
When this item is Enabled, the DRAM timing parameters are set
according to the DRAM SPD (Serial Presence Detect). When
disabled, you can manually set the DRAM timing parameters through
the DRAM sub-items.
The following items become user-configurable when this item is
Disabled.
DRAM CAS Select [3.0 Clocks]DRAM CAS Select [3.0 Clocks]
DRAM CAS Select [3.0 Clocks]DRAM CAS Select [3.0 Clocks]
DRAM CAS Select [3.0 Clocks]
Sets the latency (in clocks) between the DRAM read command and
the time the data actually becomes available.
Configuration options: [1.0 Clock] [1.5 Clock] [2.0 Clocks]
[2.5 Clocks] [3.0 Clocks] [3.5 Clocks]
DRAM tRP Select. [3.0 Clocks]DRAM tRP Select. [3.0 Clocks]
DRAM tRP Select. [3.0 Clocks]DRAM tRP Select. [3.0 Clocks]
DRAM tRP Select. [3.0 Clocks]
Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks]
[5.0 Clocks]
DRAM tRCD Select. [3.0 Clocks]DRAM tRCD Select. [3.0 Clocks]
DRAM tRCD Select. [3.0 Clocks]DRAM tRCD Select. [3.0 Clocks]
DRAM tRCD Select. [3.0 Clocks]
Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks]
DRAM tRAS SelectDRAM tRAS Select
DRAM tRAS SelectDRAM tRAS Select
DRAM tRAS Select
[8.0 Clocks][8.0 Clocks]
[8.0 Clocks][8.0 Clocks]
[8.0 Clocks]
Configuration options: [2.0 Clocks] ~ [15.0 Clocks]
Refresh Rate SelectRefresh Rate Select
Refresh Rate SelectRefresh Rate Select
Refresh Rate Select
[7.8 us][7.8 us]
[7.8 us][7.8 us]
[7.8 us]
Configuration options: [15.625 us] [3.9 us] [7.8 us] [31.3 us]
[62.5 us] [125 us]
Advanced NB
DRAM IT/2T Command [2T]
Configure DRAM Timing by SPD [Enabled]
DRAM CAS Select [3.0 Clocks]
DRAM tRP Select [3.0 Clocks]
DRAM tRCD Select [3.0 Clocks]
DRAM tRAS Select [8.0 Clocks]
Refresh Rate Select [7.8 us]
Address would be
available 2 clocks
before command.
0 - Disable
1 - Enable