Specifications

ASUS P5RD1-V DeluxeASUS P5RD1-V Deluxe

ASUS P5RD1-V Deluxe

2-272-27

2-27

2.2.

IDE connectors (40-1 pin PRI_IDE, 40-1 pin SEC IDE)IDE connectors (40-1 pin PRI_IDE, 40-1 pin SEC IDE)

IDE connectors (40-1 pin PRI_IDE, 40-1 pin SEC IDE)

This connector is for an Ultra DMA 133/100/66 signal cable. The Ultra

DMA 133/100/66 signal cable has three connectors: a blue connector

for the primary IDE connector on the motherboard, a black connector

for an Ultra DMA 133/100/66 IDE slave device (optical drive/hard disk

drive), and a gray connector for an Ultra DMA 133/100/66 IDE master

device (hard disk drive). If you install two hard disk drives, you must

configure the second drive as a slave device by setting its jumper

accordingly. Refer to the hard disk documentation for the jumper

settings.

• Pin 20 on the IDE connector is removed to match the covered hole

on the Ultra DMA cable connector. This prevents incorrect insertion

when you connect the IDE cable.

• Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE

devices.

P5RD1-V

P5RD1-V DELUXE IDE connectors

NOTE: Orient the red markings

(usually zigzag) on the IDE

ribbon cable to PIN 1.

PRI_IDE

PIN 1

SEC_IDE