Specifications

4-22 Chapter 4: BIOS setup
4.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
DRAM Frequency [Auto]
When Congure DRAM Timing by SPD is enabled, you are not allowed change
the setting of this item. The motherboard automatically sets the DDR operating
frequency according to the DRAM SPD. When Congure DRAM Timing by SPD
is disabled, this items allows you to set the DDR operating frequency manually.
Conguration options: [Auto] [533 MHz] [667 MHz]
Congure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according to the
DRAM SPD (Serial Presence Detect). When disabled, you can manually set the
DRAM timing parameters through the DRAM sub-items. The following sub-items
appear when this item is disabled. Conguration options: [Disabled] [Enabled]
DRAM CAS# Latency [5]
Controls the latency between the SDRAM read command and the time the
data actually becomes available. Conguration options: [3] [4] [5] [6]
DRAM RAS# to CAS# Delay [6 DRAM Clocks]
Controls the latency between the DDR SDRAM active command and the
read/write command. Conguration options: [3 DRAM Clocks] [4 DRAM
Clocks] [5 DRAM Clocks] [6 DRAM Clocks]
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
BIOS SETUP UTILITY
Advanced
Manual DRAM Frequency
Setting or Auto by SPD.
Advanced Chipset Settings
DRAMFrequency [Auto]
CongureDRAMTimingbySPD  [Enabled]
HyperPath3 [Auto]
DRAMThrottlingThreshold  [Auto]
BootGraphicAdapterPriority [PCIExpress/Int-VG]
InternalGraphicsModeSelect [Enabled,8MB]
Graphicsmemorytype [Auto]
PEGBufferLength [Auto]
LinkLatency [Auto]
PEGRootControl [Auto]
SlotPower [Auto]
HighPriorityPortSelect  [Disabled]