User Manual

ManualsBrandsAsus ManualsComputer equipmentP5CR-L

111

112

113

114

115

116

117

118

119

120

5-165-16

5-16

Chapter 5: DChapter 5: D

Chapter 5: D

river installationriver installation

river installation

7. When prompted, place the support CD to the optical drive.

8. Type the path to the driver, and click

OKOK

O K. For example, to install the

driver from the support CD, type

e:e:

e : in the

Insert Disk Insert Disk

Insert Disk location box

(where e: is the optical drive letter).

9. With

Gigabit Ethernet Controller Gigabit Ethernet Controller

Gigabit Ethernet Controller highlighted in the

Select OEMSelect OEM

Select OEM

Option Option

Option window, click

OKOK

O K. When the drivers are successfully installed,

the LAN adapter appears in the

Network Network

Network window.

10. Click

CloseClose

Close. The

TCP/IP Properties TCP/IP Properties

TCP/IP Properties window appears.

11. Configure the TCP/IP protocol, then click

OKOK

OK.

12. Restart the computer when prompted.

5.3.25.3.2

5.3.2

WindowsWindows

Windows

®®

NTNT

• You must install a network device driver before you can use the LAN

adapter on a Windows

NT system.

• You must upgrade the system to Windows

NT Service Pack 4 or

later before you install the LAN adapter drivers.

• BACS2 Help files require Internet Explorer 4.0 or later to work

properly. We recommend using Internet Explorer 5.0 to view help files.

To install the Broadcom

Gigabit LAN controller driver on a Windows

NT OS:

1. Restart the computer, then log on with

AdministratorAdministrator

Administrator privileges.

2. Open the

Control PanelControl Panel

Control Panel.

3. From the Control Panel, double-click the

Network Network

Network icon.

4. When the

Network Network

Network window appears, click the

Adapters Adapters

Adapters tab.

5. Select the adapter, then click

AddAdd

Add.

6. When the

Select Network Adapter Select Network Adapter

Select Network Adapter window appears, click

HaveHave

Have

Disk...Disk...

Disk...