User Manual
5-25-2
5-25-2
5-2
Chapter 5: DChapter 5: D
Chapter 5: DChapter 5: D
Chapter 5: D
river installationriver installation
river installationriver installation
river installation
5.1.25.1.2
5.1.25.1.2
5.1.2
Installing hard disk drivesInstalling hard disk drives
Installing hard disk drivesInstalling hard disk drives
Installing hard disk drives
The motherboard supports Serial ATA hard disk drives for RAID set
configuration. For optimal performance, install identical drives of the same
model and capacity when creating a disk array.
To install the SATA hard disks for RAID configuration:
1. Install the SATA hard disks into the drive bays following the
instructions in the system user guide.
2. Connect a SATA signal cable to the signal connector at the back of
each drive and to the SATA connector on the motherboard.
3. Connect a SATA power cable to the power connector on each drive.
5.1.35.1.3
5.1.35.1.3
5.1.3
Setting the RAID item in BIOSSetting the RAID item in BIOS
Setting the RAID item in BIOSSetting the RAID item in BIOS
Setting the RAID item in BIOS
You must set the RAID item in the BIOS Setup before you can create a RAID
set(s). To do this:
1. Enter the BIOS Setup during POST.
2. Go to the
Main MenuMain Menu
Main MenuMain Menu
Main Menu, select
IDE ConfigurationIDE Configuration
IDE ConfigurationIDE Configuration
IDE Configuration, then press <Enter>.
3. Select the item
Configure SATA AsConfigure SATA As
Configure SATA AsConfigure SATA As
Configure SATA As, then press <Enter> to display
the configuration options.
4. Select
RAID RAID
RAID RAID
RAID from the
Configure SATA As Configure SATA As
Configure SATA As Configure SATA As
Configure SATA As item options, then
press <Enter>.
5. Select the item
Onboard Serial-ATA BOOTROMOnboard Serial-ATA BOOTROM
Onboard Serial-ATA BOOTROMOnboard Serial-ATA BOOTROM
Onboard Serial-ATA BOOTROM, press <Enter>,
then select
EnabledEnabled
EnabledEnabled
Enabled from the options.
6. Save your changes, then exit the BIOS Setup.
Refer to the system or the motherboard user guide for details on
entering and navigating through the BIOS Setup.
5.1.45.1.4
5.1.45.1.4
5.1.4
Using the RAID configuration utilityUsing the RAID configuration utility
Using the RAID configuration utilityUsing the RAID configuration utility
Using the RAID configuration utility
You can create a RAID set using the
IntelIntel
IntelIntel
Intel
®®
®®
®
Application Accelerator Application Accelerator
Application Accelerator Application Accelerator
Application Accelerator
RAID Option ROM RAID Option ROM
RAID Option ROM RAID Option ROM
RAID Option ROM embedded in the Southbridge chip. Refer to the
succeeding sections for details on how to enter the RAID configuration
utility.