User's Manual

4-20 Chapter 4: BIOS setup
NorthBridge Conguration
The NorthBridge Conguration menu allows you to change the Northbridge related
settings.
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
v02.58(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Advanced
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
NorthBridgeChipsetConguration
MemoryRemapFeature [Enabled]
PCIMMIOALLocation:4GBTo3584MB
DRAMFrequency [Auto]
CongureDRAMTimingbySPD [Enabled]
InitiateGraphicsAdapter [PEG/PCI]
PEGPortConguration
 PEGPort [Auto]
Memory Remap Feature [Enabled]
Allows you to remap the overlap PCI memory over the total physical memory.
Conguration options: [Disabled] [Enabled]
Disable this item if you are using RedHat Linux Advanced Server 3.0 UP5/UP6
operating system.
4.4.6 Chipset Conguration
The Chipset Conguration menu allows you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
v02.58(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Advanced
CongureNorthBridge
features
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
NorthBridgeConguration
 SouthBridgeConguration