User's Manual

ASUS P5BV-C Series 2-23

2.7.2 Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY1)

This connector is for the provided Floppy Disk Drive (FDD) signal cable.

Insert one end of the cable to this connector, then connect the other end to

the signal connector at the back of the oppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when

using an FDD cable with a covered Pin 5.

P5BV-C/4L

loppy Disk Drive Connector

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

PIN1

FLOPPY

ACT/LINK LED S P E E D L E D

Status Description Status De s c r i p t i o n

OFF No link OFF No link

GREEN Linked YELLOW 100 Mbps connection

BLINKING Data activity GREEN 1 Gbps connection

LAN port LED indications

LAN port

SPEED

LED

ACT/LINK

LED