User's Manual
5-38 Chapter 5: Driver installation
5.4.7 Selecting the boot drive from a RAID set
You must have created a new RAID conguration before you can select the
boot drive from a RAID set. Refer to the Creating a RAID set: Using New
Conguration section for details.
To select the boot drive from a RAID set:
1. From the Management Menu, select
Congure > Select Boot Drive, then
press <Enter>.
2. When prompted, press the <SpaceBar> to select the bootable logical drive
from the list, then press <Enter>.
3. The logical drive is selected as boot drive. Press any key to continue.