User's Manual

5-6 Chapter 5: Driver installation
5.3 Intel
®
Matrix Storage Manager Option
ROM Utility
The Intel
®
Matrix Storage Manager Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 10), and RAID 5 sets from Serial ATA hard disk drives that
are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
®
Application Accelerator RAID Option ROM utility:
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl> + <I> to display the utility main menu.
Intel(R)MatrixStorageManagerOptionROMv5.0.0.1032ICH7RwRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
1. Create RAID Volume
2. Delete RAID Volume
  3.ResetDiskstoNon-RAID
  4.Exit
[ DISK/VOLUME INFORMATION ]
RAID Volumes:
Nonedened.
PhysicalDisks:
PortDriveModelSerial#SizeType/Status(VolID)
0 XXXXXXXXXXX XXXXXXXX XX.XXGB Non-RAIDDisk
1 XXXXXXXXXXX XXXXXXXX XX.XXGB Non-RAIDDisk
2 XXXXXXXXXXX XXXXXXXX XX.XXGB Non-RAIDDisk
3 XXXXXXXXXXX XXXXXXXX XX.XXGB Non-RAIDDisk
[↑↓]-Select [ESC]-Exit[ENTER]-SelectMenu
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.