User's Manual

5-4 Chapter 5: Driver installation
5.2.1 Creating a RAID set (RAID 0, RAID 1, RAID10, or RAID
5)
To create a RAID set:
1. From the utility menu bar, select
Create, then press <Enter>. This screen
appears.
2. Click
NEXT. This screen appears.
**[Adapter]*****[Create]********************************************
*Selectfreediskstocreate*******************************  *
**CreateArray*************************sizeSpeed* Status *
* *** Raid Level : *159.9GB SATA II * FREE *
****MaxSize(MB):*159.9GB SATA II * FREE *
* *** Capacity(MB : *159.9GB SATA II * FREE *
****StripeSize(MB):*159.9GB SATA II * FREE *
****QuickInit:   *
* *** Cache Mode : 64KB ****************** *
* * Array Name : * *
**DiskID: *   *
* * NEXT * *
****************************************** *
* *
* *
* *
* *
* *
* *
* *
* *
* *
****************************************************************************
**********
**RAID0 *
* RAID1 *
* RAID10 *
* RAID5 *
**********
****:Navigate.ENTER/SPACE:Select.ESC:Back/Exit
**[Adapter]*****[Create]********************************************
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
****************************************************************************
Selectfreediskstocreate*******************************
* IDPortDiskNameSizeSpeedStatus*
**0 0 SATA: Maxtor6G160E0 159.9GB SATA II FREE*
**4 1 SATA: SAMSUNG HD160JJ 159.9GB SATA II FREE*
**82SATA:Maxtor6G160E0 159.9GB SATA II FREE*
**12 3 SATA: SAMSUNG HD160JJ 159.9GB SATA II FREE*
* NEXT *
***********************************************************
****:Navigate.ENTER/SPACE:Select.ESC:Back/Exit