User's Manual

2-32
第二章:BIOS 程式設定
Hit ‘DEL’ Message Display [Enabled]
當您將本項目設為 [Enabled] 時,系統在開機過程中會出現「Press DEL to
run Setup」訊息。設定值有:[Disabled] [Enabled]。
Interrupt 19 Capture [Disabled]
當您使用某些 PCI 介面卡有內建韌體程式(例如:SCSI 介面卡),如果
有需要透過 Interrupt 19 啟動,則請將本項目設 [Enabled]。設定值有
[Disabled] [Enabled]。
2.6.3 安全性選單(Security)
本選單可讓您改變系統安全設定。
Change Supervisor Password(變更系統管理員密碼)
淡灰 Not Installed當您
Installed。
請依照以下步驟設定系統管理員密碼(Supervisor Password):
1. 選擇 Change Supervisor Password 項目並按下 <Enter>。
2. 於 Enter Password 視窗出現時,輸入欲設定的密碼,可以是六個字元內
的英文、數字與符號,輸入完成按下 <Enter>。
3. 按下 <Enter> Confirm Password 視窗會再次出現,再一次輸入密碼
確認密碼正確。密碼確認無誤時,系統會出現 Password Installed. 訊息,
代表密碼設定完成。若出現 Password do not match! 訊息,代表於密碼確
認時輸入錯誤,請重新輸入一次。此時畫面上方 Supervisor Password
項目會顯示 Installed。
若要變更系統管理員的密碼,請依照上述程序再執行一次密碼設定。
若要清除系統管理員密碼,請選Change Supervisor Password,並於 Enter
Password 視窗出現時,直接按<Enter>,系統會出Password uninstalled.
訊息,代表密碼已經清除。
若您忘記設定BIOS 密碼,可以採用清除 CMOS 即時鐘(RTC)
記憶體。請參閱「1.9 跳線選擇區」一節取得更多資訊。
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
<Enter> to change
password.
<Enter> again to
disabled password.