User Guide

ManualsBrandsAsus ManualsMobile PhonesP505

Initial installation and setupInitial installation and setup

Initial installation and setup

Installing the SIM card and batteryInstalling the SIM card and battery

Installing the SIM card and battery

Charging the device batteryCharging the device battery

Charging the device battery

SIM card slot

Locate the SIM card

slot, then insert the

SIM card with its nicked

corner on top and its

contacts face down.

Install the battery by

sliding it to the com-

partment (A), then press

(B) to keep it in place.

Use the stylus to

move the battery lock

to the left to secure the

battery.

Using the AC adapterUsing the AC adapter

Using the AC adapter

Connect the AC adapter plug to the

DC/USB cable plug.

(A)

WithWith

With

the cradle the cradle

the cradle: Connect the

DC/USB cable plug to the system

connector at the back of the cradle. The

cradle base lights up blue when the device

battery is charging.

You can charge a spare battery to the

battery charger slot on the cradle. The

cradle base lights up orange until the spare

battery is fully charged.

(B)

WithoutWithout

Without

the cradle the cradle

the cradle: Connect the

DC/USB cable plug to the system

connector at the bottom of the device.

Connect the AC power plug to a

grounded wall socket.

• The Power button LED lights up amber

when the battery is charging and turns

green when the battery is fully-charged.

Initial charging takes four hours. It is

strongly recommended that you fully

charge the device before use.

Using the USB plugUsing the USB plug

Using the USB plug

Connect the DC/USB cable plug to the system connector at

the bottom of the device.

Connect the USB plug of the DC/USB cable to an available

USB port on your computer or notebook.

NOTENOTE

NOTE If you charge the device battery using a notebook USB port, make

sure that the notebook is connected to an AC power source.