User Guide

26 ASUS AP5000 Installation Guide
III. Integration Procedures
Fig 3-31: Back-Site View of DA-BP4-1(S)
Fig 3-32: DA-BP4-1(S) with Box together
Per Back Plane Board contains 4 slots
to support 4 SCSI drives and it will con-
nect to Slot Card of Drive Bay.
BACK PLANE BOARD INSTALLATION
To install Back Plane Board, first we have to integrate DA-BP4-1(S) with
its box, then install on to housing. This section will show you these. Also
enclose the specification sets of jumper and switches.
Integrating the DA-BP4-1(S)
The ASUS DA-BP4-1(S) contains one SCSI connector that will connect to
on-board SCSI port of AP5000, and its back has four PCI slots connecting
to slot card of drive bay to support 4 SCSI drives. There is a box come with
the Back Plane Board for mounting it onto the housing. Below will show
the DA-BP4-1(S) with the box.
Fig 3-30: Front-Site View of DA-BP4-1(S) & Switches Specification
SCSI ID ID3 ID2 ID1 ID0
0 off off off off
1 off off off on
2 off off on off
3 off off on on
4 off on off off
5 off on off on
6 off on on off
7 off on on on
8 on off off off
9 on off off on
10 on off on off
11 on off on on
12 on on off off
13 on on off on
14 on on on off
15 on on on on
IDSEL 3/2/1/0
III. Integration
Back Plane Board