User Guide

18 ASUS AP5000 Installation Guide
Fig 3-14
Fig 3-13
Installing the memory
Insert the SDRAM (168-pin) into the DIMM socket (Fig 3-11).
Installing a VGA or PCI add-on card
Insert a VGA or PCI add-on card into the PCI slot.
Installing the ATX power switch and other signal pins
Refer to the P2L97-DS user’s manual to install the ATX power switch pin,
system indicator pin, and IDE device indicator pin. (Fig 3-13).
Fig 3-12: Insert a VGA/ PCI add-on card
Fig 3-11: Insert the SDRAM
Secure the power switch next to the FDD with screws (Fig 3-13).
III. INTEGRATION
III. INTEGRATION
IDE device indicator pin
System power indicator pin
ATX power switch pin