User guide

4-32 Chapter 4: BIOS Setup
4.6.3 Boot Settings Configuration
4.6.2 Removable Drives
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the removable boot device priority sequence from the
available removable boot devices. Configuration options: [xxxxx Drive]
[Disabled]
This item appears only when there are removable drives (like a USB
flash disk) plugged in the system.
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests
(POST) while booting to decrease the time needed to boot the system.
When set to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
Removable Device Priority
1st Boot Device [1st FLOPPY DRIV]
2nd Boot Device [ASUS USB Flash Disk]
3rd Boot Device [ASUS USB Flash Disk]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
Add On ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait for ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]