User guide

5-22 Chapter 5: Software support
Split data (Boot from IDE): This operation will split the data from the
source disk into all the selected disks. In this operation, the boot disk
cannot be placed to boot from 180.
Split data (Boot from 180): This operation is similar to “Split data into
RAID 0” operation, but the system boots from 180.
OK: Starts the operation.
Cancel: Aborts the operation.
<Disk Copy Remaiing Sector>: Displays the remaining splitting data.
6. Click OK after completing the selection. The differential warning
messages will appear following the differential operations. Click
Cancel if you want to exit the dialog box.
7. If the operation is Split data into RAID 0, the following warning
message appears. Click Yes to continue or No to cancel.
8. When completed, a restart warning message appears. Click OK.