Specifications

ASUS P4RD1-MX 1-11
To use the Hyper-Threading Technology on this motherboard:
1. Install an Intel
®
Pentium
®
4 CPU that supports Hyper-Threading
Technology.
2. Power up the system and enter the BIOS Setup (see Chapter 2:
BIOS setup). Under the Advanced Menu, make sure that the item
Hyper-Threading Technology is set to Enabled. The item appears only
if you installed a CPU that supports Hyper-Threading Technology.
3. Reboot the computer.
1.7 System memory
1.7.1 Overview
The motherboard comes with two 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets. The motherboard supports dual
channel memory architechture.
The following figure illustrates the location of the sockets:
P4RD1-MX
®
P4RD1-MX 184-pin DDR DIMM sockets
DIMM_A1
80 Pins 104 Pins
DIMM_B1