Specifications

2-222-22

2-22

Chapter 2: Basic installationChapter 2: Basic installation

Chapter 2: Basic installation

2.11 Installing the foot stands

You need to install the foot stands to place the system vertically on your

desktop.

To install the foot stands:

1. Lay the system on its side on a

flat, stable, and elevated surface,

then locate two screw holes on

the left side of the system.

2. Extend the left side of the system

at least 3 cm from the edge of

the surface to facilitate

installation.

3. Align the foot stand and chassis

screw holes.

4. Drive in a screw to secure the

footstand to the chassis.

5. Follow the same procedures when

installing the second foot stand.

The photo on the right shows the

system in a vertical desktop

placement.