User Guide
5-26 Chapter 5: BIOS setup
5.5.5 Hardware Monitor
CPU Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Ignored if you do not wish to
display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU
and chassis fan speeds in rotations per minute (RPM). If any of the fans is
not connected to the motherboard, the specic eld shows N/A.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V
Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
Smart Q-Fan function [Disabled]
Allows you to enable or disable the smart Q-fan control function. When
this eld is set to [Enabled], the item Fan Auto Mode Start Speed, Fan
Auto Mode Start Speed Temp, and Fan Auto Mode Full Speed Temp items
appear. Conguration options: [Disabled] [Enabled]
Hardware Monitor
CPU Temperature [27ºC/80.5ºF]
MB Temperature [23ºC/73ºF]
CPU Fan Speed [5232RPM]
VCORE Voltage [ 1.283V]
3.3V Voltage [ 3.396V]
5V Voltage [ 5.102V]
12V Voltage [12.276V]
Smart Q-Fan Function [Disabled]
CPU temperature beep function [Enabled]
CPU temperature high limit [95 degree]
CPU Temperature