User manual

 
4.5.5 APM Conguration
Power Button Mode [On/Off]


Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss.

Power On By PCIE Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI Express card. This feature requires an ATX power supply that provides at least

Power On By External Modem [Disabled]


4.5.3 ACPI 2.0 Support [Disabled]


4.5.4 ACPI APIC Support [Enabled]


to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.

Power Button Mode [On/Off]
Restore on AC Power Loss [Last State]
Power On By PCIE Devices [Disabled]
Power On By External Modem [Disabled]
Power On By RTC Alarm [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Select Power button
functionality.
The computer cannot receive or transmit data until the computer and

try. Turning an external modem off and then back on while the computer is off
