User manual

 Chapter 4: BIOS setup
4.5 Power menu
The Power menu items allow you to change the settings for the Advanced

(APM). Select an item then press <Enter>
4.5.1 Suspend Mode [Auto]




sleep state. In S1 sleep state, the system appears suspended
and stays in a low power mode. The system can be resumed at
any time.
 
state (default). In S3 sleep state, the system appears to be off
and consumes less power than in the S1 state. When signaled by a
 
exactly where it was left off.

4.5.2 Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS post on S3/STR resume.

Suspend Mode [Auto]
Repost Video on S3 Resume [No]
ACPI 2.0 Support [Disabled]
ACPI APIC support [Enabled]
APM Conguration
Hardware Monitor
Select the ACPI state
used for System
Suspend.
Legacy USB Support [Auto]
Allows you to enable or disable support for Legacy USB storage devices, including
Auto allows the system to
detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is
