User manual

 Chapter 4: BIOS setup
DMA Mode [Auto]

SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.

32Bit Data Transfer [Disabled]


PIO Mode [Auto]

4.3.4 SATA 1-2
While entering Setup, the BIOS automatically detects the presence of Serial ATA

then press <Enter> to display the SATA device information.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Disabled: Disables
LBA Mode.
Auto: Enables LBA
Mode if the device
supports it and
the device is not
already formatted
with LBA Mode
disabled.
Third IDE Master
Device: Not Detected
LBA/Large Mode [Auto]
Block(Multi-Sector Transfer) M [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
SMART Monitoring [Auto]
32Bit Data Transfer [Disabled]
The BIOS automatically detects the values opposite the dimmed items (Device,


N/A if no IDE device is installed in the system.