User manual

 

4.3.3 Primary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices.



press <Enter> to display the IDE device information.

The BIOS automatically detects the values opposite the dimmed items (Device,





Not Detected if no IDE device is installed in the system.

Type [Auto]

Selects the type of IDE drive. Setting to [Auto

appropriate IDE device type. Select [CDROM]

[ARMD] (ATAPI Removable Media Device) if your device





LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA



Block (Multi-Sector Transfer) M [Auto]

[Auto], the data

transfer from and to the device occurs multiple sectors at a time if the device

[Disabled], the data transfer

from and to the device occurs one sector at a time.



Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Primary IDE Master

Device : Not Detected

Type [Auto]

LBA/Large Mode [Auto]

Block(Multi-Sector Transfer) M [Auto]

PIO Mode [Auto]

DMA Mode [Auto]

SMART Monitoring [Auto]

32Bit Data Transfer [Disabled]

Select the type of de-

vice connected to the

system.