User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- Chapter 4: Software Support
- Chapter 5: RAID Support
- 5.1 RAID configurations
- 5.1.1 RAID definitions
- 5.1.2 Installing Serial ATA hard disks
- 5.1.3 Setting the RAID item in BIOS
- 5.1.4 Intel® Rapid Storage Technology enterprise SATA Option ROM Utility
- 5.1.5 Creating a RAID set
- 5.1.6 Deleting a RAID set
- 5.1.7 Resetting disks to Non-RAID
- 5.1.8 Exiting the Intel® Rapid Storage Technology enterprise SATA Option ROM utility
- 5.1.9 Rebuilding the RAID
- 5.1.10 Setting the Boot array in the BIOS Setup Utility
- 5.2 Intel® Rapid Storage Technology enterprise (Windows)
- 5.1 RAID configurations
- Chapter 6: Multi GPU Support
- Appendix
ASUS P10S WS
2-15
Chapter 2
• USB3.0devicescanonlybeusedasdatastorageonly.
• WestronglyrecommendthatyouconnectUSB3.1/3.0devicestoUSB3.1/3.0ports
for faster and better performance for your USB devices.
• Multi-VGAoutputsupportsuptotwodisplaysunderWindows
®
OS environment or
BIOS, and one display under DOS.
• Inteldisplayarchitecturedesignsupportsthefollowingmaximumsupportedpixel
clocks(PixelClock=HtotalxVTotalxFrameRate(Freshscreenrate)):
- DisplayPort/MiniDisplayPort:675MHz
- HDMI1.4b:300MHz
* LAN ports LED indications
ACT/LINK
LED
SPEED
LED
LAN port
Activity Link LED Speed LED
Status Description Status Description
Off
Nolink
Off 10 Mbps connection
Orange
Linked
Orange 100 Mbps connection
Orange(Blinking)
Data activity
Green 1Gbpsconnection
Orange(Blinking
then steady)
Readytowakeup
fromS5mode
YoucandisabletheLANcontrollersinBIOS.Oncedisabled,theLAN2port’sACT/LINK
LEDandSPEEDLEDstopblinking.ForLAN1port,theACT/LINKLEDstillblinksevenif
you disabled it.