User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- Chapter 4: Software Support
- Chapter 5: RAID Support
- 5.1 RAID configurations
- 5.1.1 RAID definitions
- 5.1.2 Installing Serial ATA hard disks
- 5.1.3 Setting the RAID item in BIOS
- 5.1.4 Intel® Rapid Storage Technology enterprise SATA Option ROM Utility
- 5.1.5 Creating a RAID set
- 5.1.6 Deleting a RAID set
- 5.1.7 Resetting disks to Non-RAID
- 5.1.8 Exiting the Intel® Rapid Storage Technology enterprise SATA Option ROM utility
- 5.1.9 Rebuilding the RAID
- 5.1.10 Setting the Boot array in the BIOS Setup Utility
- 5.2 Intel® Rapid Storage Technology enterprise (Windows)
- 5.1 RAID configurations
- Chapter 6: Multi GPU Support
- Appendix
2-14
Chapter 2: Basic Installation
Chapter 2
2.3 Motherboard rear and audio connections
2.3.1 Rear I/O connection
* and **: Refer to the tables on the next page for LAN port LEDs and audio port definitions.
Rear panel connectors
1. Optical S/PDIF Out port 6. DisplayPort
2. USB3.1Type-AportEA2(supports
USB 3.1 Boost)
7. USB3.1Type-CportEC1(supports
USB 3.1 Boost)
3. VGAport 8. DVI-D port
4. Intel
®
LANport1and2(I210-AT)* 9. USB3.0ports3,4,5,and6(lowerleft
portsupportsUSBBIOSFlashback-
red light)
5. HDMI 1.4b port 10. AudioI/Oports**