User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- Chapter 4: Software Support
- Chapter 5: RAID Support
- 5.1 RAID configurations
- 5.1.1 RAID definitions
- 5.1.2 Installing Serial ATA hard disks
- 5.1.3 Setting the RAID item in BIOS
- 5.1.4 Intel® Rapid Storage Technology enterprise SATA Option ROM Utility
- 5.1.5 Creating a RAID set
- 5.1.6 Deleting a RAID set
- 5.1.7 Resetting disks to Non-RAID
- 5.1.8 Exiting the Intel® Rapid Storage Technology enterprise SATA Option ROM utility
- 5.1.9 Rebuilding the RAID
- 5.1.10 Setting the Boot array in the BIOS Setup Utility
- 5.2 Intel® Rapid Storage Technology enterprise (Windows)
- 5.1 RAID configurations
- Chapter 6: Multi GPU Support
- Appendix
ASUS P10S WS
1-5
Chapter 1
Layout contents
Connectors/Jumpers/Buttons and switches/Slots Page
1. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V; 6-pin
EATX12V_1)
1-29
2. LGA1151 CPU socket 1-6
3. CPU, CPU optional, and chassis fan connectors (4-pin CPU_FAN; 4-pin
CPU_OPT; 4-pin CHA_FAN1-4)
1-28
4. DDR4 DIMM slots 1-7
5. MemOK! button 1-13
6. USB 3.0 connectors (20-1 pin USB3_12) 1-27
7. Clear CMOS button (CLR_CMOS) 1-15
8. Intel
®
C236 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-8) 1-23
9. EPU switch 1-14
10. DirectKey connector (2-pin DRCT) 1-31
11. Chassis Fan control setting (3 pin CHAFAN_SEL) 1-16
12. Chassis Intrusion connector (4-1 pin CHASSIS) 1-25
13. System panel connector (20-5 pin PANEL) 1-30
14. BIOS Flashback button 2-12
15. Reset button 1-12
16. Power button 1-12
17. M.2 Socket 3 1-32
18. USB 2.0 connectors (10-1 USB1112; USB910) 1-26
19. TPM connector (14-1 pin TPM) 1-25
20. Q-Code LEDs 1-19
21. Serial port connector (10-1 pin COM1) 1-31
22. Front panel audio connector (10-1 pin AAFP) 1-24
23. Digital audio connector (4-1 pin SPDIF_OUT) 1-24