User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- Chapter 4: Software Support
- Chapter 5: RAID Support
- 5.1 RAID configurations
- 5.1.1 RAID definitions
- 5.1.2 Installing Serial ATA hard disks
- 5.1.3 Setting the RAID item in BIOS
- 5.1.4 Intel® Rapid Storage Technology enterprise SATA Option ROM Utility
- 5.1.5 Creating a RAID set
- 5.1.6 Deleting a RAID set
- 5.1.7 Resetting disks to Non-RAID
- 5.1.8 Exiting the Intel® Rapid Storage Technology enterprise SATA Option ROM utility
- 5.1.9 Rebuilding the RAID
- 5.1.10 Setting the Boot array in the BIOS Setup Utility
- 5.2 Intel® Rapid Storage Technology enterprise (Windows)
- 5.1 RAID configurations
- Chapter 6: Multi GPU Support
- Appendix
ASUS P10S WS
4-11
Chapter 4
Launching AI Suite 3
Windows
®
7 OS
From the Desktop, Click Start > All Programs > ASUS > AI Suite 3 > AI Suite 3.
You can also launch AI Suite in Windows
®
7 by clicking or tapping on the Notication
area.
Windows
®
8.1 OS
To launch AI Suite 3 in Windows
®
8.1, tap the AI Suite 3 app on the Start
Screen (or if you’re using a mouse, Click the AI Suite 3 app on the Start
Screen).
Windows
®
8.1 OS
1. Place the Support DVD into the optical drive then follow onscreen instructions.
2. From the ASUS motherboard support DVD main menu, select the Utilities tab and
Click AI Suite 3.
3. Follow the succeeding onscreen instructions.
If the ASUS motherboard support DVD main menu did not appear, try the following:
a. Go to the Start Screen then Click the Desktop app.
b. On the lower left corner of the Desktop, Click File Explorer
then select your
DVD drive and tap or double-Click the Setup application.