User Guide
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Basic Installation
- Chapter 3: BIOS Setup
- Chapter 4: Software Support
- Chapter 5: RAID Support
- Appendix
ASUS P10S-M WS Series
1-19
Chapter 1
3. VGA controller setting (3-pin VGA_SW1) (for P10S-M WS/IPMI-O only)
This jumper allows you to enable or disable the onboard VGA controller. Set to pins 1-2
to activate the VGA feature.
2. PCH_MFG1 setting (3-pin PCH_MFG1)
This jumper allows you to update the BIOS ME block select.