Operation Manual

ASUS O!PLAY TV PRO
4-3
Q8. The LEDs on the Ethernet port do not blink and my wired
connection does not work.
• Ensure that the LAN Cable plug is rmly connected to the Ethernet port of
the O!PLAY TV PRO’s rear panel.
• Try to replace a functional LAN cable.
• Try to reconnect the LAN cable to the O!PLAY TV PRO to keep the
network connection active.
Audio
Q1. There is no sound.
• Ensure the volume on the entertainment unit is not on mute mode.
• Go to Setup > Audio and ensure that you have the enabled the correct
Digital Output setting.
For more details, refer to the section Conguring the audio playback
settings.
• If you are watching a video that supports multiple audio channels, press
the Option key on the remote control and select Audio to ensure that
the required audio channel is displayed.
Q2. I cannot hear any sound when I am playing music les.
• Ensure that the audio cables are properly connected.
• If the audio cables are connected to your TV, the TV must be turned on to
play any music les.
• If the audio cables are connected to your stereo, ensure that the stereo
is on and you have the correct stereo input selected. If you are having
trouble selecting the correct audio source, refer to the instructions that
came with your stereo.
Q3. A few of my Music les do not appear.
The O!PLAY TV PRO supports the most common music le formats. However,
there are almost an innite variety of bit rates and sample rates. If a le is not
displayed on the screen, it most likely uses an unsupported bit rate or sample
rate. Only use les with supported formats, bit rates, and sample rates.
E7161_O!Play_TV_PRO_Manual_V2.in3 3 3/2/12 10:37:34 AM