Operation Manual
Chapter 1: Getting started
1-14
Setting up your O!PLAY TV PRO for digital streaming
Your O!PLAY TV PRO allows you to enjoy high-denition digital audio/video
(DVBT) streaming on your TV in .mpeg format.
To set up your O!PLAY TV PRO for digital streaming:
1. Connect an HDMI cable to your HDTV or a composite AV cable to your
standard TV.
2. Connect the antenna cable to your O!PLAY TV PRO’s RF in (Antenna in)
port.
3. Connect one end of the loop-through cable to your O!PLAY TV PRO’s RF out
(Antenna out) port and the other end to your HDTV’s or standard TV’s RF in
(Antenna in) port.
• Depending on region, an antenna cable or a loop-through cable may be
included in your O!PLAY TV PRO’s package.
• For details on streaming digital TV programs, refer to the section Streaming
digital TV programs in Chapter 3.
Before using your O!PLAY TV PRO’s digital streaming function, check with your
country’s telecommunications agency or your local TV stations if DVB-T (Digital
Video Broadcasting - Terrestrial) signals are available in your country or region.
Starting for the rst time
When you start your O!PLAY TV PRO for the rst time, a series of screens appear
to guide you in conguring the basic settings of your O!PLAY TV PRO.
To start for the rst time:
1. Turn on your O!PLAY TV PRO and your HDTV, TV, or HDMI monitor.
• If you are using an HDTV or standard TV, set your HDTV/TV to video
mode.
• If you are using an HDMI monitor, ensure that the monitor’s display
resolution is set to HDMI.
2. The Setup Wizard appears. Follow the onscreen instructions to complete the
setup process.
• Refer to the documentation that came with your HDMI monitor.
• Use the remote control to navigate the screen.
E7161_O!Play_TV_PRO_Manual_V2.in14 14 3/2/12 10:36:48 AM