Operation Manual
Chapter 2: Network setup and services
2-8
PPPoE
PPPoE (Point-to-Point Protocol over Ethernet) is a specication for connecting
multiple computer users on an Ethernet local area network to a remote site through
common customer premises equipment. PPPoE provides the ability to connect
a network of hosts over a simple bridging access device to a remote Access
Concentrator.
Many apartment houses, hotels, and corporations are now providing shared
Internet access over DSL lines using Ethernet and PPPoE.
To congure the PPPoE settings on your O!Play HD2:
3. Select PPPoE Username or PPPoE
Password, and then
press .
1. From the Home screen, press the left/
right keys / to navigate to Setup,
then press .
You may also press to launch the
Setup menu.
2. Select Network > PPPoE Setup and
press .
4. Use the onscreen keyboard to enter the PPPoE Username and PPPoE
Password that was provided by your Internet Service Provider (ISP).
5. On the conrmation message, select Yes to save the setting.
e7263_oplayhd2_contents.indb 8 3/2/12 11:05:00 AM