User Manual

Intel® NUC Pro Chassis Element Product Specification
17
2.7 Wireless Enable/Disable Jumper
CAUTION
Do not change the jumper with the power on. Always turn off the power and unplug the power
cord from the carrier board before changing a jumper setting. Otherwise, the board could be
damaged.
The jumper position determines whether the wireless module on the NUC Compute Element is enabled
or disabled. See Figure 6 for the location of the jumper. Table 6 describes the jumper settings.
Figure 6. Wireless Enable/Disable Jumper Location
Table 6. Wireless Enable/Disable Jumper Settings
Function/Mode
Jumper Setting
Configuration
Enable
1-2
Wireless and Bluetooth will be enabled on the NUC Compute Element
Disable
2-3
Wireless and Bluetooth will be disabled on the NUC Compute Element