User Manual

Intel® NUC Pro Chassis Element Product Specification
14
Figure 5. CMCM2FBAV Back Panel
Table 5. CMCM2FBAV Back Panel Connectors
Item
Description
Item
Description
E
Power Input Jack
J
HDMI Ports
F
Ethernet Connectors (RJ-45)
K
HDMI Pass Thru Port
G
USB 3.x
1
Ports
L
HDMI Input Port
H
USB 2.0 Ports
M
Audio Out Jack
I
Power Cable Retention Bracket
N
Audio In Jack
1
USB 3.x port speed is determined by the Intel® NUC Compute Element.
2.3 Power
The Intel® NUC Pro Chassis Element uses a supplied AC to DC power adapter with a six-foot
attached cable with a barrel connector.
• 90-264 Volts AC input, 47-63 Hz
• 19 Volts 4.74 Amps DC output
• 3-pin AC power cord (options include no AC power cord, US AC power cord or EU AC
power cord)
• Delayed AC start is supported
CAUTION
It is strongly recommended to make sure that the NUC Pro Chassis Element is powered off and AC
power is removed before removing the NUC Compute Element from the board connector.
Removing the NUC Compute Element from the board connector while powered on may cause
damage to the NUC Compute Element, operating system corruption, create a no boot condition or
result in data loss. If the Blue LED on the board is illuminated, do not remove the NUC Compute
Element from the board connector.