User Guide

8
Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYK
User Guide – May 2023
3.0 Upgrade System Memory
The Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYK has two 260-pin DDR4 SO-
DIMM sockets.
Pre-installed memory
Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYKi7
2x 4GB DDR4-3200 SODIMMs
Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYKi5
2x 4GB DDR4-3200 SODIMMs
To upgrade memory, be sure to select memory modules that meet these
requirements:
• 1.2V low voltage memory
• 2400/2666/3200 MHz SO-DIMMs
• Non-ECC
• Up to 64GB of system memory supported with 2 SO-DIMMs using 32GB memory
modules
Find compatible memory modules in the Intel Product Compatibility Tool:
• Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYKi70QC
• Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYKi70QA
• Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYKi50WC
• Intel® NUC 13 Pro Desk Edition Mini PC NUC13VYKi50WA
NOTE
If you plan to install only one memory module, install it in the lower memory
socket.
3.1 Upgrade to Different Memory
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer.
3. Turn off the computer and disconnect the power cord.
4. Remove the computer’s bottom chassis cover.
5. Remove the pre-installed memory module
a. Gently spread the retaining clips at each end of the memory socket, which causes
the module to pop out of the socket (C).
b. Holding the module by the edges, lift it away from the socket, and store it
in an anti-static package.
6. Install the new memory module
a. Align the small space at the bottom edge of the memory module with
the key in the socket.
b. Insert the bottom edge of the module at a 45-degree angle into the
socket (A).