User Manual

Table Of Contents
4
1.3.2 Intel® NUC 13 Extreme Compute Element Feature Summary
Table 3 summarizes the major features of the Intel® NUC 13 Extreme Compute Elements.
Table 3. Feature Summary
Element Form
Factor
295.3mm x 136.5mm x 46.1mm
Processor
Socketed Intel® processor
o Integrated graphics*
o Integrated memory controller
The following processors are supported as intalled in the corresponding NUC 13 Extreme
Compute Element
o Intel® Corei9-13900K
o Intel® Corei7-13700K
o Intel® Corei5-13600K
o Intel® Corei9-13900KF
o Intel® Corei7-13700KF
o Intel® Corei5-13600KF
*The Elements with KF CPUs do not feature graphics outputs.
PCH Options
Intel® Z690 Platform Controller Hub
Memory
Two 262-pin DDR5 SDRAM Small Outline Dual Inline Memory Module (SO-DIMM) sockets
Support for DDR5 5600 MHz SO-DIMMs
Support for 8 Gb and 16 Gb memory technology
Support for up to 64 GB of system memory with two SO-DIMMs using 16 Gb memory
technology
Support for Intel® XMP memory profiles
Note: 2 Gb memory technology (SDRAM Density) is not compatible
Graphics
Integrated graphics support for processors with Intel® Graphics Technology:
One High Definition Multimedia Interface* (HDMI*) v2.1 TMDS compatible back panel connector
Two DisplayPort signals via USB Type C back panel connectors
*Graphics outputs are not present on KF SKUs.
Audio
Intel® High Definition (Intel
®
HD) Audio via the HDMI and Type C interfaces through the
processor
Realtek ALC1220 Analog Audio with Line-in, Speaker, and Microphone 3.5mm ports
Jacks support connector retasking
Storage
NUC 13 Extreme Compute Element:
One CPU-Attached PCIe Gen4 x4 NVMe M.2 2280
One PCH-Attached SATA 6.0 Gb/s or PCIe Gen4 x4 AHCI, NVMe ports are reserved for M.2
storage modules supporting M.2 2242 / M.2 2280 Note: Supports key type M (PCI Express*
x1/x2/x4 and SATA)
One PCH-Attached PCIe Gen4 x4 NVMe M.2 2242/2280
Peripheral
Interfaces
USB 4 Type C ports:
Two ports are implemented via the back panel Type C connectors
Ports not present on KF SKUs.
USB 3.2 (Gen 2/10 Gbps) Type A ports:
Six ports are implemented via the back panel connectors (blue)
Chassis
Expansion
Capabilities
One PCIe 5.0 x16 Gold Finger connector for use with supported baseboard.
One NUC x4 Extension header with the following signals:
2x SATA 3.0 signals
2x USB 3.0 signals
4x USB 2.0 signals
2x Fan control protocols
1x PCIe x1 signal
NUC Element
Expansion
Capabilities
Three M.2 connectors supporting AHCI and NVME protocols (only Slot 1 supports AHCI)
Two Thunderbolt4 via back panel Type C connectors
Thunderbolt4 ports not present on KF SKUs.