User Manual

Table Of Contents
2
1.3 Product Summary Tables
The following section presents a summary of the features for the Intel® NUC 13 Extreme Kit, and
the two different versions of the NUC 13 Extreme Compute Element.
1.3.1 Intel® NUC 13 Extreme Kit Product Summary
Table 2 summarizes the major features of the Intel® NUC 13 Extreme Kits.
Table 2. Feature Summary
Kit Form Factor
337mm x 317mm x129mm
Processor
Socketed Intel® processor
o Integrated graphics
o Integrated memory controller
The following processors are supported as intalled in the corresponding NUC 13 Extreme
Compute Element
o Intel® Corei9-13900K
o Intel® Corei7-13700K
o Intel® Corei5-13600K
PCH Options
Intel® Z690 Platform Controller Hub
Memory
Two 262-pin DDR5 SDRAM Small Outline Dual Inline Memory Module (SO-DIMM) sockets
Support for DDR5 5600 MHz SO-DIMMs
Support for 8 Gb and 16 Gb memory technology
Support for up to 64 GB of system memory with two SO-DIMMs using 16 Gb memory
technology
Support for Intel® XMP memory profiles
Note: 2 Gb memory technology (SDRAM Density) is not compatible
Graphics
Integrated graphics support for processors with Intel® Graphics Technology:
One High Definition Multimedia Interface* (HDMI*) v2.1 TMDS compatible back panel connector
Two DisplayPort signals via USB Type C back panel connectors
Audio
Intel® High Definition (Intel
®
HD) Audio via the HDMI and Type C interfaces through the
processor
Realtek ALC1220 Analog Audio with Line-in, Speaker, and Microphone 3.5mm ports
Jacks support connector retasking
USB Audio via a stereo 3.5mm combination headset jack on the front panel (on the NUC Kits)
Storage
NUC 13 Extreme Compute Element:
One CPU-Attached PCIe Gen4 x4 NVMe M.2 2280
One PCH-Attached SATA 6.0 Gb/s or PCIe Gen4 x4 AHCI, NVMe ports are reserved for M.2
storage modules supporting M.2 2242 / M.2 2280 Note: Supports key type M (PCI Express*
x1/x2/x4 and SATA)
One PCH-Attached PCIe Gen4 x4 NVMe M.2 2242/2280
Two SATA 6.0 Gb/s ports implemented from the baseboard inside the chassis for use with 2 x
2.5in or 1 x 3.5in hard drives
Peripheral
Interfaces
USB 4 Type C ports:
Two ports are implemented via the back panel Type C connectors
USB 3.2 (Gen 2/10 Gbps) Type A ports:
Six ports are implemented via the back panel connectors (blue)
USB 3.2 (Gen 2/10 Gbps) Type C port:
One port is implemented on the front panel of the Kit
USB 3.2 (Gen 1/5 Gbps) Type A ports:
Two ports are implemented on the front panel of the kit (through the baseboard
expansion)
Chassis
Expansion
Capabilities
One PCIe 5.0 x16 slot* with support for a triple slot GPU up to ~12.5” (317.5mm) maximum
length