User Manual

Intel NUC Kit/Mini PC NUC11PA{X} Technical Product Specification
36
Configuration
None
BIOS Recovery Update process if a matching *.bio file is found. Recovery
Update can be cancelled by pressing the Esc key.
If the Recovery Update was cancelled or a matching *.bio file was not
found, a Config Menu will be displayed. The Config Menu consists of the
following (followed by the Power Button Menu selections):
[1] Suppress this menu until the BIOS Security Jumper is
replaced.
[2] Clear BIOS User and Supervisor Passwords.
[3] Reset Intel® AMT to default factory settings.
[4] Clear Trusted Platform Module.
Warning: Data encrypted with the TPM will no longer be
accessible if the TPM is cleared.
[F2] Intel® Visual BIOS.
[F4] BIOS Recovery.
See Section 6.3.2 Power Button Menu
5.1.1.3 Fan Header Current Capability
Table 18 lists the current capability of the fan headers.
Table 18. Fan Header Current Capability
Fan Header
Maximum Available Current
Processor fan
1 A
5.1.1.4 Power Supply Connectors
NOTE External power voltage, 19 (±5%) V DC, is dependent on the type of
power supply used. System power requirements will depend on actual system
configurations chosen by the integrator, as well as end user expansion preferences.
It is the system integrator’s responsibility to ensure an appropriate power budget for
the system configuration is properly assessed based on the system-level
components chosen.
5.2 Mechanical Considerations
5.2.1 Form Factor
The board is designed to fit into a custom chassis. Figure 9 illustrates the mechanical
form factor for the board. Dimensions are given in inches [millimeters]. The outer
dimensions are 104.8 millimeters (front to back) by 105.7 millimeters (side to side).