User Manual
Table Of Contents
- 2 Product Description
- 3 Product Layout
- 4 Feature Descriptions
- 5 Technical Reference
- 6 Overview of BIOS Features
Intel NUC Kit/Mini PC NUC11PA{X} Technical Product Specification
34
Table 16. States for a Dual-Color Power LED
LED State
Description
Off
Power off
Blinking (white)
Standby
Steady (white) Normal operation
NOTE
The LED behavior shown in Table 15 is default – other patterns may be set via BIOS
setup.
5.1.1.1.4 Power Switch Header
Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The
switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power
supply to switch on or off (the time requirement is due to internal debounce circuitry on
the board). At least two seconds must pass before the power supply will recognize
another on/off signal.
5.1.1.2 BIOS Security Jumper
CAUTION
Do not move a jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the board
could be damaged.
Figure 8 shows the location of the BIOS Security Jumper. The 3-pin jumper determines
the BIOS Security program’s mode.