User Manual

29
2.18 Antenna Connectors
The NUC 11 Extreme Kit wireless module has front and rear panel internal antennas that connect
to the NUC 11 Extreme Compute Element MMCX style connectors. For wireless and Bluetooth
operation appropriate antennas will be required. Figure 13 shows the location of the two antenna
connectors on the NUC 11 Extreme Compute Element
Figure 13. Location of the Antenna Connectors
The wireless module on the NUC 11 Extreme Compute element is the Intel WIFI 6E AX210NGW
and uses a standard 2x2 mm size RF micro coaxial receptacle (connector) with an outer diameter of
1.5 mm as defined in the PCI-E M.2 Specification, the coaxial receptacle is then changed to the
MMCX Micromate style connector for more robust connection in chassis.