User Manual

Intel NUC Kit/Mini PC NUC11AT{X} Technical Product Specification

Configuration

None

BIOS Recovery Update process if a matching *.cap file is found. Recovery

Update can be cancelled by pressing the Esc key.

If the Recovery Update was cancelled or a matching *.bio file was not

found, a Config Menu will be displayed. The Config Menu consists of the

following (followed by the Power Button Menu selections):

[1] Suppress this menu until the BIOS Security Jumper is

replaced.

[2] Clear BIOS User and Supervisor Passwords.

[3] Reset Intel® AMT to default factory settings.

[4] Clear Trusted Platform Module.

Warning: Data encrypted with the TPM will no longer be

accessible if the TPM is cleared.

[F2] Intel® Visual BIOS.

[F4] BIOS Recovery.

See Section 6.3.2 Power Button Menu

5.1.1.3 Fan Header Current Capability

Table 13 lists the current capability of the fan headers.

Table 13. Fan Header Current Capability

Fan Header

Maximum Available Current

Processor fan

1 A

5.1.1.4 Power Supply Connectors

NOTE External power voltage, 19 (±5%) V DC, is dependent on the type of power

supply used. System power requirements will depend on actual system configurations chosen

by the integrator, as well as end user expansion preferences. It is the system integrator’s

responsibility to ensure an appropriate power budget for the system configuration is properly

assessed based on the system-level components chosen.

5.2 Mechanical Considerations

5.2.1 Form Factor

The board is designed to fit into a custom chassis. Figure 8 illustrates the mechanical form factor

for the board. Dimensions are given in inches [millimeters]. The outer dimensions are

104.1 millimeters (front to back) by 121.6 millimeters (side to side).