User manual

方正科技服务器用户使用手册
4.2 Reminus MT100 1200 SCSI RAID1 Settings
Power on, when screen display:
Press Ctrl-C to start LSI Logic Configuration Utility...
Press Ctrl-C to run SCSI RAID1 settings;
Press ENTER, system will scan SCSI devices;
Chose Mirroring Properties, after press ENTER system will display hard
disks information;
If you have two hard disks, use +/- key set two hard disks to Primary
and Secondary, save and exit;
If you have three hard disks, you may set the third hard disk to HOT
Spare.
5 Windows 2003 Server Installation
1、Boot
Put Windows 2003 Server CD into the CD-ROM, power on and set the
system boot from CD-ROM;