User manual

方正科技服务器用户使用手册
settings.
Select an item then press <Enter> to display the configuration options.
Change Supervisor Password
Select this item to set or change the supervisor password. The
Supervisor
Password item on top of the screen shows the default Not Installed
Installed.
After you set a password, this item shows Installed Installed.
To set or change a supervisor password:
1. Select the Change Supervisor Password item, then press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set
your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password:
Select the Change Supervisor Password then press <Enter>. The
message “Password Uninstalled” appears.
After you have set a supervisor password, the other items appear to allow
you to change other security settings.