User manual

方正科技服务器用户使用手册
The items in this menu allows you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
USB Function [All USB Ports]
Allows you to enable a specific number of USB ports, or disable the
USB
function. Configuration options: [Disabled] [2 USB Ports] [All USB Ports]
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices.
Setting to[Auto] allows the system to detect the presence of legacy USB
devices at
startup. If detected, the USB controller legacy mode is enabled. If no
legacy
USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps)
or
FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed]
Super IO Configuration