User manual

方正科技服务器用户使用手册
3 Reminus MT100 1200 Hardware Installation
3.1 Safety Measures
Computer components and electronic circuit boards can be damaged by
discharges of static electricity. Working on computers that are still
connected to a power supply can be extremely dangerous. Follow the
simple guidelines below to avoid damage to your computer or yourself.
Always disconnect the computer from the power outlet whenever you are
working inside the computer case.
If possible, wear a grounded wrist strap when you are working inside the
computer case. Alternatively, discharge any static electricity by
touching the bare metal chassis of the computer case, or the bare
metal body of any other grounded appliance.
Hold electronic circuit boards by the edges only. Do not touch the
components on the board unless it is necessary to do so. Do not flex
or stress the circuit board.
Leave all components inside the static-proof packaging until you are
ready to use the component for the installation.