Manual

52
Chapter 3: Managing your NAS via its Web GUI
3.3.21 Turning o your hard disk drives
To turn o your hard disk drives:
1. From the navigation pane, select Maintenance > Power Management.
2. In the Power Management eld, ensure that Enable is ticked.
3. In the Turn O Hard Drive dropdown list, select the time of inactivity (in minutes)
before the hard drives are turned o and your NAS enters the sleep mode.
NOTES:
• In Sleep mode, the HDD LEDs light solid green.
• The NAS wakes up immediately when you access les or folders on the internal/external
disks and the HDD LEDs blink blue.
• If you enable the BT Client function, the HDD will not turn o automatically.
• If the rescan time in Twonky UPnP server is set to less than ve minutes, the HDD will
not turn o. To set the rescan time in Twonky UPnP server, click Twonky UPnP server >
TwonkyMedia Setting > Sharing > Rescan in minutes.
E6146_NAS-M25_Manual.indd 52 11/30/10 9:39:34 AM