Manual

47Chapter 3: Managing your NAS via its Web GUI
3.3.15 Setting the administrator password
The password enables you to log in the NAS Web GUI.
To set the administrator password:
1. From the navigation pane, click Maintenance > Password.
2. In the Password Settings area, create a new administrator password. Click Apply
when done.
3.3.16 Saving / loading / restoring system settings
From the navigation pane, click Maintenance > Setting, then do any of the following:
• Click Save to back up the current system settings.
• Click Load to load another set of system settings.
• Click Restore to restore the system to its factory default settings. You may also use the
reset button at the back of your NAS to perform system restoration.
NOTE:
System settings include account, shared folder, password settings, and other settings.
E6146_NAS-M25_Manual.indd 47 11/30/10 9:39:31 AM