Manual

Chapter 2: Setting up your NAS

WARNING:

• Use only the bundled power adapter. Using other power adapters may damage your

device.

• Ensure that you plug the power adapter to a power source with the correct power rating

(100 ~ 240VAC).

2.1.3 Turning your NAS ON/OFF

To turn your NAS ON:

Press and hold the power button at the front of your NAS until the power LED starts

blinking blue.

To turn your NAS OFF:

• Press and hold the power button at the front of your NAS for more than ve seconds

until the power LED starts blinking blue.

• Use the Web GUI. See

3.2 Knowing the Home screen

and

3.3.20 Shutting down /

restarting / putting NAS on Sleep mode

for details.

Power button

(

with LED

)

2.1.2 Connecting your NAS to a power source

To connect your NAS to a power source:

1. Connect the power cord to the power adapter.

2. Connect the power adapter to the DC IN port at the back of your NAS.

3. Plug the power cord into a power outlet.

E6146_NAS-M25_Manual.indd 22 11/30/10 9:39:21 AM